TRACE 1300 Series GC Pre-Installation Guide - Revision F, January 2016
This guide contains preinstallation requirements that must be in compliance before installing the instrument.
TRACE 1300 Series GC User Guide - Revision F, January 2016
This guide contains detailed information for the use of the TRACE 1300 and TRACE 1310 GC.
TRACE 1300 Series GC Spare Parts Guide - Revision F, January 2016
This guide contains detailed information about ordering spare parts for the TRACE 1300 and TRACE 1310 GC.
TRACE 1300 Series GC Hardware Manual - Revision J, March 2019
This manual contains detailed information about installing, maintaining, and troubleshooting the TRACE 1300/TRACE 1310 gas chromatograph.
TRACE 1310 Auxiliary Oven Instruction Manual - Revision D, January 2016
This manual contains information for installing and using the TRACE 1310 Auxiliary Oven.
TRACE 1300 Series GC Compact Auxiliary Oven Instruction Manual - Revision A, January 2016
This manual contains information for installign and using the Compact Auxiliary Oven.
TRACE 1300 Series GC Setup & User Guide for Xcalibur - Revision D, September 2014
This guide provides the instructions for the control of the TRACE 1300 Series GC through Xcalibur.
TRACE 1300 Series GC No Vent Microfluidics Installation Guide - Revision A, March 2013 and No Vent Quick Reference Card - Revision A, April 2013
This quick-start guide provides instructions for installing the NoVent Microfluidics on your TRACE 1300 or TRACE 1310 GC and your ISQ or TSQ 8000 mass spectrometer.
Large Volume Splitless Kit for TRACE 1300 Series Installation Guide - Revision A, November 2012
This guide provides instructions for installing the Large Volume-Splitless kit for the TRACE 1300 Series GC.
Dual Detector Microfluidics - Revision A, October 2013
This quick-start guide provides instructions for installing the Dual Detector Microfluidics on your Trace 1300 or Trace 1310 GC.
Hot Injection Adapter Kit - Revision A, December 2013
This guide provides the instruction for installing the Hot Injection Adapter Kit on the SSL injector for the use with an external device for gas sampling.
PKD Column Gas Sampling Valve - Revision A, February 2014
This guide provides instructions for installing the adapters for connecting 1/8-inch or 1/16-inch OD metal packed columns to the bottom of the Gas Sampling Valve injector, FID, NPD, ECD, TCD, and FPD detectors.
Pressure Regulator Kit GSV - Revision A, February 2014
This guide provides instructions for installing the Pressure Regulator Kit for adjusting the pressure of the carrier gas to correctly supply the Gas Sampling Valve (GSV) injector.
Gas Sampling Valve Installation Note - Revision A, February 2014
This note provides instructions for removing the relief pins.
Gas Sampling Valve Backflush Kit - Revision A, 2014
This guide provides instructions for connecting your Gas Sampling Valve module with precolumn and analytical capillary column into the oven of the TRACE 1300 Series GC.
TCD in Series Installation Note - Revision A, March 2013
This note provides instruction for installing and connecting the TCD module in-series with a second detector installed on the TRACE 1300 Series GC, or to the methanizer in case of the TRACE 1310 Auxiliary Oven.
Helium Saver Module User Guide - Revision B, January 2016
This Guide provides technical information and installation instructions for the Thermo Scientific Instant Connect Helium Saver Injector Module.
On Column System - Revision B, August 2015
This guide provides the instructions for installing and operating with the On-Column injector (OCI) system for TRACE 1300 Series GC.
Deans Switch Installation Guide - Revision A, June 2014
This guide provides instructions for installing the Deans Switch Microfluidics on your TRACE 1300 Series GC.
Thermospray SSL Injector User Guide - Revision A, September 2014
This guide describes the Thermo Scientific Thermospray SSL injector module and provides instructions for programming the injector parameters, and for installing and maintaining the injector.
Methanizer Assembly User Guide - Revision B, June 2014
This note provides instruction for installing, maintaining, and troubleshooting the methanizer assembly for the TRACE 1310 Auxiliary Oven.
Split Fitting Kit - Revision B, October 2014
This note provides instructions for installing the Split Fitting Kit for the use of one channel of the auxiliary gas module for controlling a split flow.
NPD Source Instruction Note - Revision A, July 2012
This note provides instructions for replacing the thermionic source of the NPD detector.